EVO-STIK Fast Set Floor & Wall Tile Adhesive for Wood, Concrete & Plaster has been specially developed for fixing ceramic, porcelain, natural stone, quarry, slate, granite and terrazzo. Waterproof and frost resistant, it is suitable for interior and exterior use. EVO STIK Fast Set Floor & Wall Tile Adhesive for Wood, Concrete & Plaster can be applied directly onto cured concrete and screeds, onto plaster and plasterboard, over tiles and onto wood. It is also suitable for use with most domestic underfloor heating kits and can be used for thin and thick bed applications to a maximum depth of 12mm. Need to add some information ensuring to cover the underfloor heating or can this adhesive be used in direct contact? See highlighted Precautions section and point 8. When using EVO-STIK Fast Set Floor & Wall Tile Adhesive for Wood, Concrete & Plaster for installations that incorporate underfloor heating, the heating must be switched off for at least 48 hours before and after application
- Rapid setting formulation – takes foot traffic after two hours
- Waterproof and frost resistant
- Suitable for interior and exterior use
| SPECIFICATION | |
| Brand | Evo Stik |
| Unit Length of Piece (mm) | 280mm |
| Unit Width of Piece (mm) | 320mm |
| Unit Height of Piece (mm) | 100mm |
| Unit Weight of Piece (Kg) | 10.6kg |
| Carton Depth (mm) | 280mm |
| Carton Weight (kg) | 10.06kg |
| Carton Width (mm) | 320mm |
| Colour | Grey |
| Composition | A blend of cement, polymers and selected fillers |
| Coverage | 10kg: Fixes up to 3.5m² (approx.) Dependent on the nature of the substrate, the adhesive bed thickness and the type of tile. |
| Dry Time | Can be grouted after 2 hours |
| For Use in Fully Immersed Locations | Yes |
| Form | Powder |
| Suitable for Heated Subfloors | Yes |