Standard Set Flex is a specially formulated non-slip, flexible, standard-setting, cement-based adhesive. It is suitable for beds of 3 – 12mm, interior, exterior, floor, and wall applications. Standard Set Flex is suitable for fixing most types of tiles including porcelain natural stone and large format tiles. It is suitable for use in more demanding areas including with large format wall tiles, on timber substrates and in swimming pools.
- White
- Polymer Modified
- Up to 5 hour pot life
| SPECIFICATION | |
| Brand | Larsen |
| Unit Length of Piece (mm) | 410mm |
| Unit Width of Piece (mm) | 240mm |
| Unit Height of Piece (mm) | 120mm |
| Unit Weight of Piece (Kg) | 20kg |
| Colour | White |
| Coverage | Approx 4kg/m² @ 3mm bed |
| Curing Time | Pot Life 5 hours at @20°C, Grout after 18 hours, light foot traffic after 18 hours, full traffic after 24 hours, depending on site conidtions. |
| Material | Powder |
| Odourless | Yes |
| Service Temperature | Plus 5°C to 30°C |
| Shelf Life | 6 months in unopened manufacturer’s packaging |
| Solvent Free | Yes |
| Suitable Surface | It is suitable for beds of 3 – 12mm, interior, exterior, floor and wall applications. See Technical Datasheet for full details and recommendations. |
| Used For | It is suitable for beds of 3 – 12mm, interior, exterior, floor and wall applications. Standard Set Flex is suitable for fixing most types of tiles including porcelain natural stone and large format tiles. |
| Warranty | C2 TE |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
