Suitable for use in temperatures between +5°C and +30°C. Cut back the area to be repaired to provide a straight edge with a minimum depth of 10mm (do not feather edge the material). Priming is not typically required on roughened surfaces; however, on smooth, dense, or very absorbent substrates, the use of a bonding agent is recommended. Expose and remove any corroded steel in the area to be repaired. Remove all loose scale and corrosion deposits. Steel should be cleaned to a bright condition, including the back of exposed steel bars, using an abrasive-blasting technique. Add the contents of a 25kg bag to 3.75-4.00 litres of clean potable water. Mix the material for 1-3 minutes in a suitable drum mixer or use a suitable paddle mixer until a stiff mortar consistency is achieved. Only mix enough material to allow application/installation within 5-10 minutes. For applications more significant than 50mm, CSM-120 can be bulked out with a 30% addition of Kilsaran 3-5mm grit. CSM-120 should be placed and finished within 5-10 minutes of mixing. Once mixed, place the fresh material onto the prepared substrate and trowel firmly into position, ensuring full contact with the substrate is made.
- Rapid Set Pavement Repair Bag 25Kg
- Pre-mixed product only requiring the addition of water
- High abrasion resistance
| SPECIFICATION | |
| Brand | Kilsaran |
| Sub Brand | KPRO |
| Unit Weight of Piece (Kg) | 25kg |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
