Lardec is a solvent-based, long-chain, alkyd wood stain and primer. It is ideal for use on all joinery components; for example, window frames, doors, garden sheds and garden furniture, poultry houses, etc. Lardec will not peel or flake and can be over-painted. It has excellent penetration and ‘run off’ properties and won’t obscure the grain.
- High performance oil based wood stain
- Ready to use and easy to apply
- Range of standard colours
| SPECIFICATION | |
| Brand | Larsen |
| Unit Length of Piece (mm) | 315mm |
| Unit Width of Piece (mm) | 315mm |
| Unit Height of Piece (mm) | 450mm |
| Unit Weight of Piece (Kg) | 20kg |
| Application Method | Ready to use - do not dilute. Mix well before use. Always check colour before use. Brush or spray apply. Alternatively a dip tank system may be used. |
| Coverage | 1L will cover 5-10m² (depending on timber). |
| Drying Time | Touch dry in 2 hours, hard dry in 8 hours depending on conditions |
| Drying Time Recoating | Minimum 8 hours |
| Number of Coats Required | 1 |
| Parent Colour/Hex | Ebony |
| Product Type | Solvent based wood stain |
| Suitable Surface | Surfaces must be clean, dry, and free from dust and grease. |
| VOC -Volatile Organic Compound | Less than 700g/L |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
