Polyfloor is an economical, single pack, high gloss, oil-based floor paint based on tough polyurethane resins to give a tough, durable finish. Polyfloor is suitable for use in areas subject to light to medium traffic. Applications include workshops, domestic garages, general storage areas, corridors, etc.
- Low cost maintenance product
- Coloured, single pack system
- Ready to use - easy to apply
| SPECIFICATION | |
| Brand | Larsen |
| Unit Weight of Piece (Kg) | 5kg |
| Application Method | On porous substrates it is advisable to use a priming coat. Two coats (excluding prime coat) are required to achieve maximum depth of colour and ensure maximum protection. In some cases, 3 coats may be required (e.g. light colours). |
| Coverage | Coverage 10 - 12 m2/L per coat, depending on porosity and texture of surface. |
| Drying Time | Touch dry in 2-3 hours. Overcoat after 24-48 hours |
| Drying Time Recoating | Overcoat after 24-48 hours |
| Finishing Type | High gloss floor paint |
| Number of Coats Required | 2 |
| Parent Colour/Hex | Grey |
| Product Type | Oil based floor paint |
| Suitable Surface | All surfaces should be at least 14 days old. It is recommended that surfaces should be mechanically prepared. Surfaces should be clean, firm and free from contamination such as grease, dirt, oil, etc |
| VOC -Volatile Organic Compound | Less than 500g/L |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
