HYTEC P510 RENOGRUND is a single-component primer for absorbent and non-absorbent substrates. Suitable for shutting off capillary rising damp or residual moisture up to max. 4.5 CM-% on unheated and max. 3.0 CM-% on heated, permanently moisture-resistant substrates. Not suitable for shutting off capillary rising damp on calcium sulphate and magnesia screeds. Sanding can be dispensed with during filling work if HYTEC P510 RENORAPID is again primed with GRIP A936 XPRESS.
- Ready to use
- High adhesive strength
- Strong tightening effect
| SPECIFICATION | |
| Brand | Bostik |
| Unit Length of Piece (mm) | 230mm |
| Unit Width of Piece (mm) | 180mm |
| Unit Height of Piece (mm) | 290mm |
| Unit Weight of Piece (Kg) | 12.1kg |
| Coverage | As primer: approx. 150 g/m². As a moisture barrier: approx. 250-300 g/m² (applied twice at intervals of 1 2 hours) |
| Curing Time | Approx. 1 2 hours |
| Material | Polyurethane |
| Odourless | No |
| Paintable | No |
| Shelf Life | 6 Months |
| Solvent Free | No |
| Suitable Surface | Raw Concrete Floors, Cement, Calcium Sulphate, Stone Wood, Magnesia, Can Be Used For The Consolidation Of Sore Screed Edges, As Bonding Bridge On Substrates With Residues Of Old, Firmly Adhering Adhesives |
| Used For | PU Primer for all types of absorbent and non absorbent subfloors |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
