EVO-STIK Floor Tile Grout for Concrete Floors is Waterproof and frost resistant, it is suitable for interior and exterior use, for glazed and unglazed floor tiles. It is suitable for grouting ceramic floor tiles with joints up to 12mm in width. EVOSTIK Floor Tile Grout for Concrete Floors conforms to BS EN 13888 : 2002 : CG1. Ideal for grouting externally or where the grout is regularly wetted. EVO-STIK Floor Tile Grout for Concrete Floors can be used for grouting wall tiles, but it is advisable to carry out a test if used with decorative glazed tiles.For grouting wooden floors or for use with underfloorheating, we recommend EVO-STIK Floor Tile Grout Fast Setfor Wood and Concrete Floors.
- Suitable for interior & exterior use
- Long open time for areas which are awkward or complicated to grout
- Waterproof & frost resistant
| SPECIFICATION | |
| Brand | Evo Stik |
| Unit Length of Piece (mm) | 155mm |
| Unit Width of Piece (mm) | 315mm |
| Unit Height of Piece (mm) | 100mm |
| Unit Weight of Piece (Kg) | 5.04kg |
| Carton Depth (mm) | 378mm |
| Carton Weight (kg) | 15.398kg |
| Carton Width (mm) | 194mm |
| Colour | Grey |
| Composition | A blend of cement, polymers and selected fillers |
| Coverage | Up to 6.5m² per 5kg of powder. This figure is approximate and is based upon 30cm x 30cm tiles with 5mm wide by 7mm deep joints between the tiles. Dependent upon the nature of the substrate, the type of tile, tile dimensions and the width of grout joints |
| Dry Time | Approx. 24 hours Note: Drying times will be greatly increased at lower temperatures |
| Form | Powder |
| Suitable for Heated Subfloors | Yes |