Suitable for use in temperatures between +5°C and +30°C. Ensure the supporting base is stable, sound, and free from any dust, dirt, or grease. Once clean the base should be presoaked and all ponded water should be removed prior to the application of the priming slurry. Kilsaran Priming Slurry should be mixed with 5.0-5.4 litres of clean potable water per 20kg bag of material for 3-4 minutes to reach the desired consistency, suitable for priming. Once mixed apply a 1mm-2mm coat of priming slurry to the pre-soaked base. Following the installation of the bedding material, such as Kilsaran HSBC, all paving units should be pre-soaked and then have their bedding face coated with a 1mm-2mm coat of the priming slurry and then placed into position.
- Priming Slurry For Paving 20 Kg Bag
- Eliminates wastage
- Improves adhesive strength of paving
| SPECIFICATION | |
| Brand | Kilsaran |
| Sub Brand | KPRO |
| Unit Weight of Piece (Kg) | 20kg |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
