| Specification | Value |
|---|---|
| Supplier Product Code | WBRY249G0505 |
| Brand | Larsen |
| Primary Colour | Grey |
| Product Size | 5L |
| Unit Weight of Piece (Kg) | 5kg |
| Application Method | On porous substrates it is advisable to use a priming coat. Two coats (excluding prime coat) are required to achieve maximum depth of colour and ensure maximum protection. In some cases, 3 coats may be required (e.g. light colours). |
| Coverage | 8 - 12mΒ² |
| Coverage Spec | Up to 12m2 per litre |
| Drying Time | 2 - 4 Hours |
| Drying Time Recoating | Overcoat after 24-48 hours |
| Drying Time Spec | Touch dry in 2 - 3 hours. Overcoat after 24 - 48 hours |
| Finishing Type | Gloss |
| Finishing Type Spec | High gloss floor paint |
| Number of Coats Required | 2 |
| Parent Colour/Hex | Grey |
| POS Selling Point #1 | Economical polyurethane resins |
| POS Selling Point #2 | Tough and durable finish |
| POS Selling Point #3 | For light to medium traffic |
| Product Type | Oil based floor paint |
| Suitable Surface | All surfaces should be at least 14 days old. It is recommended that surfaces should be mechanically prepared. Surfaces should be clean, firm and free from contamination such as grease, dirt, oil, etc |
| VOC -Volatile Organic Compound | Less than 500g/L |
| Washable | No |
| Washable Spec | No |
| Waterproof | No |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
|
Declaration of Performance (DoP)
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
