Larsen Construction Timber Preserver is a ready to use wood preservative for the prevention of damage to timber from blue stain, wet rot, dry rot and wood boring insects and their larvae. It’s low odour microemulsion technology penetrates deeply into the wood to give long lasting protection and contains a dye for easy identification of treated areas.
- Prevents rot and insect attack
- Long lasting protection
- Tinted to indicate treated areas
| SPECIFICATION | |
| Brand | Larsen |
| Unit Length of Piece (mm) | 110mm |
| Unit Width of Piece (mm) | 55mm |
| Unit Height of Piece (mm) | 180mm |
| Unit Weight of Piece (Kg) | 1kg |
| Application Method | Apply by Brush or low pressure spray. (Exterior application must be by brush ONLY.) |
| Coverage | For a preventative use against wood boring beetles 100 ml/m2 (1L per 10 m2). For a preventative use against wood rotting fungi 152.8 - 200 ml/ m2 (1L per 5 m2). For curative use against wood boring beetles 300 ml/m2 (1L per 3.3 m2) |
| Drying Time | Product is touch dry in 1 hour depending on wood and ambient conditions. |
| Drying Time Recoating | Wood can be over coated after 24hrs if dry. |
| Fade Resistant | No |
| Number of Coats Required | 1 |
| Parent Colour/Hex | Blue/Green Tint |
| Product Type | Wood Preserver |
| Suitable Surface | Wood should be clean and free from wood dust, paint, varnish and other contaminants which may prevent penetration. |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
