Larsen Exterior Woodstain and Preserver is a solvent-based, ready-to-use wood preservative for the treatment of new and existing timber. It is a protective and decorative minimal build stain offering prevention of the effects of wood destroying and wood discolouring fungi and woodworm.
- Oil based
- Wood stain and preserver
- 2 in 1 Long lasting protection again rot and woodworm
| SPECIFICATION | |
| Brand | Larsen |
| Unit Length of Piece (mm) | 160mm |
| Unit Width of Piece (mm) | 160mm |
| Unit Height of Piece (mm) | 225mm |
| Unit Weight of Piece (Kg) | 5kg |
| Application Method | Non-Professional/Professional β Brush or roller suitable for solvent-borne products. Professional/Industrial β Dipping or Spraying in special facilities. |
| Coverage | For Outdoor Use Only. Apply by suitable roller or brush at a rate of at least 180ml/m2 or 1L per 5.5m2. For best results apply in 2-3 light coats depending on nature of timber. Timber may also be dipped for a minimum of 3min. |
| Drying Time | Touch dry in 12 hours depending on wood and ambient conditions. |
| Drying Time Recoating | Allow at least 24 hours before overcoating. |
| Number of Coats Required | 3 |
| Parent Colour/Hex | Fir Green |
| Product Type | Woodstain and Preserver |
| Suitable Surface | For application on all exterior timber, which is not in direct contact with the ground or surface water, e.g. joists, end grains, facades, windows, doors, fences, sheds etc |
| VOC -Volatile Organic Compound | <700 g/l (Cat. A/f): 700 g/l (2010) |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
