| Specification | Value |
|---|---|
| Supplier Product Code | WBRM107T20 |
| Brand | Larsen |
| Primary Colour | Teak |
| Product Size | 20L |
| Unit Length of Piece (mm) | 315mm |
| Unit Width of Piece (mm) | 315mm |
| Unit Height of Piece (mm) | 450mm |
| Unit Weight of Piece (Kg) | 20kg |
| Application Method | Ready to use - do not dilute. Mix well before use. Always check colour before use. Brush or spray apply. Alternatively a dip tank system may be used. |
| Coverage | 8 - 12mΒ² |
| Coverage Spec | Up to 10m2 per litre |
| Drying Time | 1 - 2 Hours |
| Drying Time Recoating | Minimum 8 hours |
| Drying Time Spec | Touch dry in 2 hours, hard dry in 8 hours depending on conditions |
| Finishing Type | Varnish |
| Finishing Type Spec | Woodstain |
| Number of Coats Required | 1 |
| Parent Colour/Hex | Teak |
| POS Selling Point #1 | High performance oil based stain |
| POS Selling Point #2 | Excellent penetration properties |
| POS Selling Point #3 | Requires 20L |
| Product Type | Solvent based wood stain |
| Suitable Surface | Surfaces must be clean, dry, and free from dust and grease. |
| VOC -Volatile Organic Compound | Less than 700g/L |
| Washable | No |
| Washable Spec | No |
| Waterproof | No |
|
Safety Data Sheet
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
|
Declaration of Performance (DoP)
|
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions. |
